How to Use a 2 Litre Pressure Sprayer (Step by Step)
Updated 30-10-2026 · Flyaux team
Quick answer
Fill the sprayer, close the cap tightly, pump the handle 15–20 times to build pressure, then press the trigger. Turn the brass nozzle to switch between mist and jet. Release pressure and rinse with clean water after use.
Steps
- Unscrew the pump handle and fill the bottle up to the 2 L mark.
- Screw the cap back on tightly.
- Pump the handle up and down 15–20 times.
- Point the nozzle and press the trigger.
- Turn the nozzle: one way for fine mist, the other for a strong jet.
- Pump again when the spray gets weak.
Cleaning after use
Release the pressure, empty the bottle and spray clean water through the nozzle for a few seconds. This stops soap or fertiliser from blocking the nozzle.
Safety tips
Do not over-pump. Wear gloves when spraying fertiliser or plant chemicals and follow the label on the chemical.
